FAQ | Mirror polish that surpasses new cars | Zuya Factory, a car coating specialist in Saitama City

You can find out the truth by checking the Q & A on the "National Car Coating Special Site" that we also post. The verification results are also available here.

In general, deep scratches that get caught on your nails may not be completely erased. There are some scratches with a narrow (narrow) scratch depth and a deep scratch depth, and some scratches with a wide (large) scratch depth but a shallow scratch depth, so it cannot be said unconditionally. The reality is that you can't understand until you actually polish it. Even if 100% of the scratches have not disappeared, polishing often makes the corners of the scratched mouth rounded, making it difficult to see.

The baking finish at the time of repair is often in a state where various parts are attached, and it is baked at a low temperature, but the painting panel at the time of a new car is baked at a higher temperature than the baking temperature at the time of repair, and the coating density on the surface Is expensive.

It depends on the manufacturer and model, but it is often between 80 and 180 microns. It is a numerical value of all thicknesses from the iron plate part to the undercoat and middle coat. Even if you use the "film thickness meter", you cannot find the value of clear only. By the way, the thickness of Saran Wrap seems to be about 10 microns in many cases. * 1 Micron is 1/1000 mm.

At this time, there is no practical coating agent for automobile painting. To be correct, it is considered to be "hard to be scratched". Since the feeling of scratches varies depending on the customer, including the installer, it may not be strange for some people to feel that they are not scratched. Whether it is a coating agent with hardness or a coating agent without hardness, the hardness of the painted surface after construction depends on the coating of the base. (It is better to think of it as base coating + α) Glass coating ・ Ceramic coating feels high hardness when this liquid is cured as it is, but when it is applied to the body, it is finished with an ultra-thin film, so glass coating It is not formed as the hardness of the main solution of the agent cured as it is. For example, it is the difference in how the hardness of "gold nugget" and "gold leaf", which are the same material, is felt. It is advisable to confirm that the hardness PR (diamond? 13H?) Is not the hardness of the glass coating agent itself, but the data of the panel actually applied to the painted surface. Currently, even with a glass coating that claims to have high hardness, there are cases where nails are scratched around the doorknob. (The hardness of the nail is generally said to be 2H.) At our shop, the film thickness is made by applying a flexible coating.

This is a very important process that affects the fixing of the coating. At our shop, we remove the deposits on the painted surface by chemical treatment, prepare the surface layer by polishing treatment, degreasing and then applying the coating.

It can be easily removed by moistening the tissue with water (soft water instead of hard water) and placing it on the bird droppings. If left unattended, it may cause stains depending on the paint condition and the type of bird droppings, so we recommend removing it as soon as possible.

It varies depending on the coating agent and coating method, but in theory it does not change over time.
Unless it is scraped off with an abrasive, it will not fall off naturally.
There may be small scratches and deposits, but the car wash will remove the dirt and restore the luster.

Customers' storage conditions vary from person to person.
The condition after construction will be different for those who park in the garage with a roof and those who park in the blue sky.
Therefore, we will issue a construction certificate covered by non-life insurance,
We do not issue warranty cards with ambiguous standards like other companies' conventional products.
In the case of conventional products, guarantees are provided based on ambiguous standards (low gloss, etc.), and painted surfaces are guaranteed without guaranteeing coated surfaces.
Most of them have restrictions or uselessness unless the new car is sold.
Nothing is found that guarantees the coating film.

The coated surface is glass hardened.
Since it is not an oil-based coating agent, it does not repel water.
It feels like the curtain runs down to a low place.
If you use an overcoat agent, you can get a water-repellent effect.
You can change it according to your preference.

can.
There is a special overcoat agent called.
After washing the car, if you apply it together with the water when you wipe it off, the water repellent effect will last for about 1 to 2 months.
Enjoy the water-repellent effect with very easy and easy work,
We can also show you an excellent special water repellent that improves the gloss and protects the glass film.

The coated surface is a glass film that has been cured at room temperature.
Do not use water repellents for windowpanes as they are different from windowpanes.
Please use a special agent for water repellent effect.

It is overwhelmingly less likely to be scratched than when nothing is processed, but it will gradually get scratched over time.
It cannot be completely prevented in the future.

It is attached, but it can be easily removed by car wash.
However, some stains are persistent, so even glass can stick to it.
The key to keeping it beautiful is to wash the car as soon as possible.
A maintenance cleaner is sold separately for dirt that cannot be removed by any means.

There is a special cleaner for items that cannot be removed by car wash.
At our shop, we sell after-maintenance products such as special car wash kits and cleaners, and provide after-sales service.
( Click here for details.)
Please feel free to contact us regarding paint mist.

It gives a fresh luster like a freshly painted clear paint.
The color of the paint is clear, as if it were sprinkled with water.
You can expect a heavy luster that cannot be obtained with conventional products or wax.
It seems that some of the conventional products have dullness and glossiness, but the gloss of the coating agent handled in our shop is exceptional.
Please experience this "wonderful luster" by yourself.

Of course it is possible.
Some coating agents are only allowed to be applied by trained technicians.
Of course, our shop has also received the training, so we will construct it with high technology.
You don't have to choose the color of the car you want to build.
Great luster can be expected for dark colors such as black and navy blue.

Yes, I can.
In the case of a used car, the coating film is first restored to a state close to that of a new car by pretreatment polishing, and then coated.
Remove scale, water spots, rain stains, small scratches, etc. as much as possible.
After that, it will be protected with glass, so it will be clean so that it can be mistaken.
Please contact us for surface treatment.